Subterranean Utility Lines and Leaks

Subterranean Utility  Leaks
Sub utility leaks are a problem that not everyone has to deal with. Homeowners with pools, guest homes, or other similar amenities are the people who have a potential for such a problem. The utility lines that carry water to and from these structures tend to be weaker than utility lines found in the main home. Weaker materials are more susceptible to breaking and creating a sub utility leak.

sub utility leak

Since these sorts of utility lines are subterranean, they tend to be harder to detect and locate. Lines must be excavated, repairs are much harder than they are with utility lines found in the main home. Since it is hard to know of, find, and repair sub utility leaks, they can present a danger to the home.

If a household has subterranean utility lines, it is important to be vigilant in keeping track of changes around them. One way to detect a sub utility leak is to look for visible signs that a leak is occurring. Another way to check for a sub utility leak is to use underground imaging techniques. While both of these methods are more effective when a trained professional is present, it may be impossible to perform underground imaging without a trained person.

These leaks can be a major problem for people with pools, gardens, or other structures that may require subterranean supply lines. The problems can be wide-spread and expensive. This fact is compounded by the progressive nature of sub utility leaks. It is important to keep these leaks in mind and watch for signs. This will save times, money, and stress.

Very green grass can be one visible sign of a leak. Soil wet spots and changes in the foundation can also be signs of a sub utility leak. Underground imaging uses radar to detect sub utility leaks. Another method of detecting such a leak is to determine the pressure inside a subterranean utility line. A low pressure is a sign that there is a leak. Generally, underground imaging methods are done after visible signs have been discovered.

Subterranean utility leaks are progressive, which means that they will get worse and worse as time passes. They are also large. Without repair, they will get much worse, causing more extensive damage. A sub utility leak in an in-ground irrigation system can waste more than 5,000 pounds of water every month. Of course, the damage is not limited to wasted water. Shifts in the foundation of a building or broken pipes can be the result of a sub utility leak.

With quick detection and repair, problems that might have been caused by a sub utility leak will not appear. Repairing a sub utility leak can also save money. When the leak is stopped, less of the utility will be wasted, which will save money on that bill. It will also save money in repair costs. Since the leaks are progressive, letting it go for too long may result in a high repair cost. Additionally, sub utility leaks can cause other problems that can become extremely expensive to mend.

Subterranean Pool Leaks
One of the most common objects that causes a sub utility leak is a pool. A leak from a pool is an expensive problem since it requires more water than usual to fill the pool. Pool owners barely notice leaks from their pools due to automatic refill pumps. When undetected, these leaks can cause major damage and cost a lot of money.

Pool leaks are very complicated because there are many potential sources for a leak. One leak might be in cracks throughout the foundation of the pool, but another leak might be in the supply line running water to the pool. The broken supply lines are sub utility leaks.

Cracks in the foundation, like sub utility leaks, are progressive. Without proper attention, they will inevitably get worse. This can cause high utility pools and major repair expenses, which put a huge strain on a person’s budget. Cracks can also be distributed, which complicates the problem even more. To save money, it is best to detect and repair a cracked foundation as soon as possible.

Supply lines to a pool create a complex system with many places that could stop functioning. Pool supply lines tend to be weaker than main supply lines, which makes them more likely to break. In areas where the temperature fluctuates, the supply lines will be even weaker. Supply line leaks could lead to foundation cracks if too much pressure is placed on the pool. These types of leaks are sub utility leaks, so they also come with every problem associated with that type of leak as well.